WRM iButton
The WRM1000 & WRM2000 are SALTO iButton wall readers. They read data from the iButton carriers and then communicate it to the control units. They also allow for updating of the carriers via the SALTO Virtual Network technology.
The reader is IP 46 compliant and features a built-in heater making it suitable for use indoors and out, including environments exposed to harsh weather conditions.
Main features and benefits:
- Reading by contact with the iButton.
- Can be flush or surface mounted depending on the base (available separately).
- WRM1000 to be used with CU2010.
- WRM2000 to be used with CU5000, CU50EN and CU50ENSVN Control Units.
- Red and Green coloured LED to indicate lock authorisation, only WRM2000.
- Blue coloured LED to indicate carrier updating.
- Built-in heater.
- For external use and protection against vandalism it can be used with the FWAV cover and flush mounting base.
- Compatible with standard electrical back boxes for easy fitting.
- Can be used for integration with other systems through the addition of the Wall Reader Adaptor or Control Unit Adaptor.
Technical data:
- Body made of die cast Zinc Alloy
- Reader made of Stainless Steel
- IP-46 compliant
- The maximum cable length between the control unit and the wall reader is up-to 100mtrs. (WRM1000 50 mtrs.) with twisted pair cable
- Size: 83 x 83 x 16 mm (W x H x D)
- Connection to the control unit using UTP CAT 5 cable
- 5V supplied by the control unit
- For surface mounting with the WRMBH
- For flush mounting with WRMBL
